# Deploy SD-Core gNB Simulator This guide covers how to install and configure the SD-Core gNB Simulator. ## Requirements - Juju >= 3.4 - A Juju controller has been bootstrapped - A Kubernetes cluster configured with Multus - 1 Juju cloud for the Kubernetes cluster has been added ## Deploy gNB Simulator Create a Juju model. ```console juju add-model gnbsim gnbsim-cloud ``` Deploy the `sdcore-gnbsim-k8s` operator charm. ```console juju deploy sdcore-gnbsim-k8s gnbsim --trust --channel=1.4/beta \ --config gnb-interface=ran \ --config gnb-ip-address=10.204.0.10/24 \ --config icmp-packet-destination=8.8.8.8 \ --config upf-gateway=10.204.0.1 \ --config upf-subnet=10.202.0.0/24 ``` Integrate the simulator with the offering from SD-Core. ```console juju consume control-plane.amf juju integrate gnbsim:fiveg-n2 amf:fiveg-n2 ```