Deploy SD-Core gNB Simulator

This guide covers how to install and configure the SD-Core gNB Simulator.

Requirements

• Juju >= 3.4

• A Juju controller has been bootstrapped

• A Kubernetes cluster configured with Multus

• 1 Juju cloud for the Kubernetes cluster has been added

Deploy gNB Simulator

Create a Juju model.

juju add-model gnbsim gnbsim-cloud

Deploy the sdcore-gnbsim-k8s operator charm.

juju deploy sdcore-gnbsim-k8s gnbsim --trust --channel=1.4/beta \
  --config gnb-interface=ran \
  --config gnb-ip-address=10.204.0.10/24 \
  --config icmp-packet-destination=8.8.8.8 \
  --config upf-gateway=10.204.0.1 \
  --config upf-subnet=10.202.0.0/24

Integrate the simulator with the offering from SD-Core.

juju consume control-plane.amf
juju integrate gnbsim:fiveg-n2 amf:fiveg-n2